Machinery / 4 Spindle Tapping Machine

  • Design Features

    • Steady feeding of material by air pressure.
    • Easy adjustment and maintenance of belts.
    • Raise 30-40% life-time of tap than conventional tap.
    • Higher efficiency, easy to change tap and can work separately by single shaft.
    • Stop feeding when tap is blunt or bad bore diameter.
    • Air pressure cylinder pulls back automatically to ready position while detecting abnormal operation.
    • Easy to change the speed of tapping by using our air pressure cylinder.
    • Economically save more power and less space requirement.

Specification Table

Model Product Range Shaft Revolution (rpm) Tap Length x R (mm) Output / Minute (pcs/min) Main Motor (hp) Total Power (kw) Oil Tank Capacity (l) Net weight (kg) Length x Width x Height (cm)
FTM08B M3-M5
#3-#8
3200-3000 M125 x 20R 600-500 1/2HP x 4P x 4 2.1 400 850 120 x 165 x 185
FTM13B M5-M8
#8-5/16
3100-1700 M215 x 25R 400-200 1HP x 4P x 4 3.95 420 900 140 x 166 x 181
FTM19B M8-M12
5/16-1/2
2100-1400 M300 x 30R 320-200 2HP x 4P x 4 7.15 500 980 156 x 181 x 186
FTM24B M12-M16M
1/2-5/8
1600-1100 M320 x 35R 180-120 3HP x 4P x 4 10.3 650 1700 153 x 180 x185
FTM32B M16-M22
5/8-7/8
1000-750 M400 x 45R 140-90 5HP x 6P x 4 16.35 750 3800 187 x 223 x213
FTM38B M18-M24
3/4-1
950-660 M480 x 55R 120-70 7.5HP x 6P x 4 23.55 850 4600 215 x 235 x 248
FTM46B
Two spindle
M24-M30
1-1&1/4
770-500 M600 x 70R 45-26 10HP 6P x2 16.5 650 3850 224 x 186 x 248
FTM60B
Two spindle
M30-M39
1&1/4-1&1/2
370-190 M606 x 85R 20-10 10HP x 6P x 2 16.5 650 3900 224 x 186 x 248