Taps
High Speed Nut Taps ( H-SNT )
Size: M3 to M24
Coating: TiN, TiCN
​
Available in
Metric coarse thread
Metric fine thread
Unified coarse thread
Unified fine thread
Whitworth coarse thread
British standard fine thread
Bent Shanks
Nut taps are welding onto the bent shanks. Concentricity is thoroughly checked to provide excellent results.
Spiral Fluted Tap ( SFT )
SFT
This tap made by premium grade high speed steel for rigidity and wear resistance, suitable for blind hole tapping of carbon steel, alloy steel, and nonferrous metals, whose chips are produced in continuous coil form.
TiN - SFT
This tap with superior wear and welding resistance suitable for tapping in low-medium carbon steel and stainless steel.
DH-SFT
This tap is suitable for tapping blind deep hole, the design reduces damage caused by chi packing and minimizes the problem of galling.
Can Roll Taps - Fluteless Taps ( CRT )
Using plastic deformation to produce internal thread, this tap is suitable for tapping low carbon steel, alloy steel, stainless steel and nonferrous metals with stringy materials.
Features of fluteless taps
They are suitable for blind hole tapping in producing internal thread with no chips, they save you time from disposing chip.
The effect of fluteless gives a large cross-section area to the tap that effectively eliminates the problem of chip jamming and thus makes the roll very strong.
Fluteless tap produce excellent pitch diameter well within pitch diameter tolerances.
Material deformation process produces the internal thread with good surface finish as well as precise pitch diameter.
​
Spiral Pointed Taps ( POT )
POT
Suitable for through hole tapping of carbon steel, alloy steels, and nonferrous metals, whose chips are produced in continuous coil form. These taps discharge chips through the hole.
TiN-POT
This tap is capable of tapping a wide range of material, but is especially suited for high speed tapping of stainless steels, and quenched and tempered steels.
DH-POT
Suitable for tapping deep through holes, especially in materials that are prone to burn seizure during machining.
Hand Taps - Straight Fluted Tap ( HT )
HT
This tap is made of AISI, M2, HSS and premium grade high speed steel HSSE. These standard taps that can be used in a variety of applications.
TiN-HT
Because of its superior cutting edges, this tap is suitable for tapping hardened materials that produce short and broken chips.
FC-HT
Suitable for tapping grey case iron, nodular cast iron, malleable cast iron, brass casting and other similar materials.
​
